P.Cherriman, L. Hanzo
Department of Electronics and Computer Science,
Univerity of Southampton, SO17 1BJ, UK.
Tel: +44 703 593125, Fax: +44 703 593045
Email:
lh@ecs.soton.ac.uk
© 1997 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to refuse any copyrighted component of this work in other works must be obtained from the IEEE.
To be presented at the IEEE Vehicular Technology Conference, Phoenix, USA, May 4-7, 1997
The performance of a power-control algorithm[?] suitable for multi-mode transceivers is investigated using 1, 2 and 4 bit/symbol modems. It is shown that the algorithm is suitable for maintaining a target frame error rate, irrespective of the modulation mode employed. The transceiver parameters are summarised in Table ?, while the minimum and maximum required average transmitted powers in the cell for the different modes are given in Table ?.